Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Ford Crown Victoria is one of the great classics. Even though this action is very easy to complete, some of you are almost certainly wondering why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Ford Crown Victoria? We will now answer these questions.

check-brake-fluid-level-ford-crown-victoria

Advantage to always have the brake fluid level up in your Ford Crown Victoria

So we begin our content with the interest of looking at the brake fluid level on a Ford Crown Victoria. This fluid has a vital function on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is therefore necessary to verify the brake fluid level of your Ford Crown Victoria often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid will lose its properties. This process is specially simple and does not require advanced experience of mechanics, so it is easy for all Ford Crown Victoria owners to do it on their own. If the Brake light on the dashboard of your Ford Crown Victoria does not match to a lack of brake fluid, do not hesitate to consult our content for details. However, there are some measures and rules to follow that we will notice in the next part of this content.

How to fill up the brake fluid of a Ford Crown Victoria

So now we will describe to you how to do the brake fluid level on a Ford Crown Victoria. Please note that this is very basic to accomplish. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this information in the user manual of your Ford Crown Victoria. Now here are the steps to follow to make your level:

  • Open your cover and find your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, read the instructions on the cap carefully so as not to make any problems within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ford Crown Victoria up to the mark “Max”.
  • If the level was under the “Min” mark before you examined the brake fluid level in your Ford Crown Victoria, make sure you verify the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to safely and securely fill the brake fluid level of your Ford Crown Victoria.

If you want more tutorials on the Ford Crown Victoria, go to our Ford Crown Victoria category.