Among the small routine service works that you should do regularly on your car, to fill up the brake fluid level of your Fiat Panda 3 is one of the most classics. Nevertheless this process is simple to accomplish, some of you are most probably wondering why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Fiat Panda 3? We will now answer these questions.
Benefit to always have the brake fluid level up in your Fiat Panda 3
So we begin our article content with the significance of verifying the brake fluid level on a Fiat Panda 3. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that after a while you may lose brake fluid without any particular leak (without any leakage). It is therefore important to examine the brake fluid level of your Fiat Panda 3 often (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid loses its properties. This process is particularly simple and does not require amazing knowledge of mechanics, so it is easy for all Fiat Panda 3 owners to do it on their own. If the Brake light on the dashboard of your Fiat Panda 3 does not match to a lack of brake fluid, do not be reluctant to read our article content for details. Nevertheless, there are some precautions and rules to respect that we will check out in the next section of this article content.
How to fill up the brake fluid of a Fiat Panda 3
So now we will show to you how to do the brake fluid level on a Fiat Panda 3. Please be aware that this is very elementary to perform. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this data in the user manual of your Fiat Panda 3. Now here are the steps to adhere to to make your level:
- Open your cover and locate your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is based on top of the master cylinder (metal part) and has a yellow cap.
- Once discovered, browse the instructions on the cap attentively so as not to make any mistakes within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Fiat Panda 3 up to the mark “Max”.
- If the level was under the “Min” mark before you inspected the brake fluid level in your Fiat Panda 3, be sure to examine the level in a few days/weeks to make sure you don’t have a leak in the brake system
.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Fiat Panda 3.
If you need more guides on the Fiat Panda 3, go to our Fiat Panda 3 category.
