Among the small routine service works that you should do regularly on your car, to fill up the brake fluid level of your Fiat Fullback is one of the most classics. Although this process is very easy to conduct, some of you are probably attempting to find why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Fiat Fullback? We will now answer these questions.

check-brake-fluid-level-fiat-fullback

Benefit to always have the brake fluid level up in your Fiat Fullback

So we begin our content page with the significance of checking the brake fluid level on a Fiat Fullback. This fluid has an important task on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is as a result fundamental to check the brake fluid level of your Fiat Fullback often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid will lose its features. This operation is specially simple and does not require amazing expertise of mechanics, so it is easy for all Fiat Fullback owners to do it on their own. If the Brake light on the dashboard of your Fiat Fullback does not match to a lack of brake fluid, do not be reluctant to have a look at our content page for details. However, there are some precautions and rules to respect that we will discover in the next part of this content page.

How to fill up the brake fluid of a Fiat Fullback

So now we will explain to you how to do the brake fluid level on a Fiat Fullback. Please be aware that this is very elementary to do. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Fiat Fullback. Now here are the steps to adhere to to make your level:

  • Open your hood and identify your brake fluid reservoir, it is very easy to identify, it is usually made of whitish/transparent plastic, it is placed on top of the master cylinder (metal part) and has a yellow cap.
  • Once located, examine the instructions on the cap carefully so as not to make any problems during the operation, we encourage you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Fiat Fullback up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Fiat Fullback, make sure to check the level in a few days/weeks to be certain you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to safely fill the brake fluid level of your Fiat Fullback.

If perhaps you have any further questions about the Fiat Fullback, do not hesitate to consult our Fiat Fullback category.