Among the small routine service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Fiat 500X is one of the most classics. Nevertheless this act is basic to conduct, some of you are most likely trying to figure out why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Fiat 500X? We will now answer these questions.


Advantage to always have the brake fluid level up in your Fiat 500X

So we start our guideline with the interest of checking the brake fluid level on a Fiat 500X. This fluid has a vital task on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is consequently imperative to verify the brake fluid level of your Fiat 500X on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid loses its characteristics. This operation is extremely simple and does not require amazing knowledge of mechanics, so it is easy for all Fiat 500X owners to do it on their own. If the Brake light on the dashboard of your Fiat 500X does not match to a lack of brake fluid, do not hesitate to browse our guideline for details. Nevertheless, there are some safety measures and rules to respect that we will check out in the next section of this guideline.

How to fill up the brake fluid of a Fiat 500X

So now we will describe to you how to do the brake fluid level on a Fiat 500X. Please take note that this is very simple to perform. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Fiat 500X. Now here are the steps to adhere to to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to locate, it is in most cases made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once established, read the instructions on the cap carefully so as not to make any problems within the the operation, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Fiat 500X up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Fiat 500X, be sure to verify the level in a few days/weeks to ensure you don’t have a leak in the brake system

That’s it, you now have all the info you need to properly fill the brake fluid level of your Fiat 500X.

To get more tips on the Fiat 500X, take a look at the Fiat 500X category.