Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Fiat 500 is one of the great classics. Although this act is very easy to complete, some of you are likely attempting to find why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Fiat 500? We will now answer these questions.


Advantage to always have the brake fluid level up in your Fiat 500

So we begin our content page with the benefit of verifying the brake fluid level on a Fiat 500. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is consequently important to examine the brake fluid level of your Fiat 500 on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid will lose its properties. This process is extremely simple and does not require amazing expertise of mechanics, so it is easy for all Fiat 500 owners to do it themselves. If the Brake light on the dashboard of your Fiat 500 does not correspond to a lack of brake fluid, do not be reluctant to seek advice from our content page for details. However, there are some safety measures and rules to follow that we will check out in the up coming section of this content page.

How to fill up the brake fluid of a Fiat 500

So now we will explain to you how to do the brake fluid level on a Fiat 500. Please be aware that this is very basic to perform. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this information in the user manual of your Fiat 500. Now here are the steps to stick to to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
  • Once identified, browse the instructions on the cap attentively so as not to make any problems during the process, we encourage you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Fiat 500 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Fiat 500, remember to examine the level in a few days/weeks to be certain you don’t have a leak in the brake system

That’s it, you now have all the info you need to safely fill the brake fluid level of your Fiat 500.

If you wish more tutorials on the Fiat 500, go to our Fiat 500 category.