Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Dodge Durango is one of the great classics. Although this act is elementary to perform, some of you are likely trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Dodge Durango? We will now answer these questions.

check-brake-fluid-level-dodge-durango

Advantage to always have the brake fluid level up in your Dodge Durango

So we start our content page with the benefit of looking at the brake fluid level on a Dodge Durango. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is therefore essential to examine the brake fluid level of your Dodge Durango on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid loses its attributes. This process is specially simple and does not require evolved expertise of mechanics, so it is easy for all Dodge Durango owners to do it themselves. If the Brake light on the dashboard of your Dodge Durango does not match to a lack of brake fluid, do not hesitate to browse our content page for details. On the other hand, there are some precautions and rules to follow that we will check out in the following section of this content page.

How to fill up the brake fluid of a Dodge Durango

So now we will learn to you how to do the brake fluid level on a Dodge Durango. Please be aware that this is very basic to perform. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Dodge Durango. Now here are the steps to follow to make your level:

  • Open your hood and situate your brake fluid reservoir, it is very easy to situate, it is in general made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, examine the instructions on the cap mindfully so as not to make any mistakes within the the process, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Dodge Durango up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Dodge Durango, remember to examine the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Dodge Durango.

To find more tips on the Dodge Durango, take a look at the Dodge Durango category.