Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Citroen C6 is one of the most classics. Even though this work is simple to do, some of you are most likely questioning why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Citroen C6? We will now answer these questions.

check-brake-fluid-level-citroen-c6

Advantage to always have the brake fluid level up in your Citroen C6

So we commence our content with the significance of checking the brake fluid level on a Citroen C6. This fluid has a fundamental task on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is consequently essential to verify the brake fluid level of your Citroen C6 on a regular basis (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid will lose its properties. This operation is really simple and does not require evolved experience of mechanics, so it is easy for all Citroen C6 owners to do it themselves. If the Brake light on the dashboard of your Citroen C6 does not match to a lack of brake fluid, do not be reluctant to read our content for details. On the other hand, there are some precautions and rules to follow that we will see in the following section of this content.

How to fill up the brake fluid of a Citroen C6

So now we will learn to you how to do the brake fluid level on a Citroen C6. Please take note that this is very basic to carry out. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Citroen C6. Now here are the steps to adhere to to make your level:

  • Open your cover and locate your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once identified, browse the instructions on the cap cautiously so as not to make any mistakes during the operation, we encourage you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Citroen C6 up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Citroen C6, make sure verify the level in a few days/weeks to ensure that you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to securely fill the brake fluid level of your Citroen C6.

To get more tips on the Citroen C6, take a look at the Citroen C6 category.