Among the small service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Citroen C-crosser is one of the great classics. Even though this act is very easy to conduct, some of you are most probably concerned about why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Citroen C-crosser? We will now answer these questions.

check-brake-fluid-level-citroen-c-crosser

Advantage to always have the brake fluid level up in your Citroen C-crosser

So we start our content with the benefit of looking at the brake fluid level on a Citroen C-crosser. This fluid has a crucial task on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that after a while you may lose brake fluid without any particular leak (without any leakage). It is consequently fundamental to verify the brake fluid level of your Citroen C-crosser often (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid will lose its properties. This procedure is specially simple and does not require evolved knowledge of mechanics, so it is easy for all Citroen C-crosser owners to do it on their own. If the Brake light on the dashboard of your Citroen C-crosser does not correspond to a lack of brake fluid, do not hesitate to browse our content for details. However, there are some safety measures and rules to follow that we will discover in the next section of this content.

How to fill up the brake fluid of a Citroen C-crosser

So now we will describe to you how to do the brake fluid level on a Citroen C-crosser. Please notice that this is very elementary to complete. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this data in the user manual of your Citroen C-crosser. Now here are the steps to adhere to to make your level:

  • Open your hood and identify your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
  • Once located, examine the instructions on the cap mindfully so as not to make any mistakes within the the procedure, we advise you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Citroen C-crosser up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Citroen C-crosser, make sure you verify the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Citroen C-crosser.

If perhaps you have any additional questions about the Citroen C-crosser, do not hesitate to consult our Citroen C-crosser category.