Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Chevrolet Silverado is one of the most classics. Even though this process is basic to do, some of you are almost certainly questioning why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Chevrolet Silverado? We will now answer these questions.
Advantage to always have the brake fluid level up in your Chevrolet Silverado
So we start our article with the interest of verifying the brake fluid level on a Chevrolet Silverado. This fluid has a crucial task on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is consequently very important to verify the brake fluid level of your Chevrolet Silverado on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid loses its attributes. This process is specially simple and does not require evolved knowledge of mechanics, so it is easy for all Chevrolet Silverado owners to do it on their own. If the Brake light on the dashboard of your Chevrolet Silverado does not match to a lack of brake fluid, do not be reluctant to consult our article for details. On the other hand, there are some measures and rules to follow that we will see in the following part of this article.
How to fill up the brake fluid of a Chevrolet Silverado
So now we will show to you how to do the brake fluid level on a Chevrolet Silverado. Please take note that this is very elementary to accomplish. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this data in the user manual of your Chevrolet Silverado. Now here are the steps to stick to to make your level:
- Open your bonnet and locate your brake fluid reservoir, it is very easy to situate, it is generally made of whitish/transparent plastic, it is based on top of the master cylinder (metal part) and has a yellow cap.
- Once uncovered, browse the instructions on the cap carefully so as not to make any problems within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Chevrolet Silverado up to the mark “Max”.
- If the level was under the “Min” mark before you examined the brake fluid level in your Chevrolet Silverado, be sure to verify the level in a few days/weeks to make sure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to safely fill the brake fluid level of your Chevrolet Silverado.
If you have any additional questions about the Chevrolet Silverado, do not hesitate to consult our Chevrolet Silverado category.
