Among the small routine service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Chevrolet Equinox is one of the great classics. Even though this process is very easy to conduct, some of you are most probably wanting to know why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Chevrolet Equinox? We will now answer these questions.


Benefit to always have the brake fluid level up in your Chevrolet Equinox

So we start our article with the benefit of looking at the brake fluid level on a Chevrolet Equinox. This fluid has a crucial function on your car, transmit the braking power to the wheels and thus stop your car. However, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is as a result important to examine the brake fluid level of your Chevrolet Equinox often (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid loses its attributes. This procedure is really simple and does not require amazing expertise of mechanics, so it is easy for all Chevrolet Equinox owners to do it themselves. If the Brake light on the dashboard of your Chevrolet Equinox does not correspond to a lack of brake fluid, do not be reluctant to browse our article for details. However, there are some precautions and rules to follow that we will notice in the next section of this article.

How to fill up the brake fluid of a Chevrolet Equinox

So now we will describe to you how to do the brake fluid level on a Chevrolet Equinox. Please take note that this is very basic to perform. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Chevrolet Equinox. Now here are the steps to stick to to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to situate, it is usually made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once discovered, read the instructions on the cap mindfully so as not to make any problems within the the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Chevrolet Equinox up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your Chevrolet Equinox, be sure to examine the level in a few days/weeks to be certain you don’t have a leak in the brake system

That’s it, you now have all the information you need to securely fill the brake fluid level of your Chevrolet Equinox.

In the event that you have any additional questions about the Chevrolet Equinox, do not hesitate to consult our Chevrolet Equinox category.