Among the small routine service acts that you should do regularly on your car, to fill up the brake fluid level of your Chevrolet City Express is one of the most classics. Nevertheless this act is basic to conduct, some of you are probably concerned about why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Chevrolet City Express? We will now answer these questions.

check-brake-fluid-level-chevrolet-city-express

Benefit to always have the brake fluid level up in your Chevrolet City Express

So we start our content with the interest of looking at the brake fluid level on a Chevrolet City Express. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that with time you may lose brake fluid in the normal way (without any leakage). It is as a result important to verify the brake fluid level of your Chevrolet City Express on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid loses its features. This process is particularly simple and does not require evolved experience of mechanics, so it is easy for all Chevrolet City Express owners to do it on their own. If the Brake light on the dashboard of your Chevrolet City Express does not correspond to a lack of brake fluid, do not be reluctant to seek advice from our content for details. However, there are some measures and rules to follow that we will see in the next part of this content.

How to fill up the brake fluid of a Chevrolet City Express

So now we will show to you how to do the brake fluid level on a Chevrolet City Express. Please be aware that this is very simple to perform. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this data in the user manual of your Chevrolet City Express. Now here are the steps to adhere to to make your level:

  • Open your cover and locate your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once found, read the instructions on the cap mindfully so as not to make any mistakes during the process, we suggest you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Chevrolet City Express up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Chevrolet City Express, remember to verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Chevrolet City Express.

To find more tips on the Chevrolet City Express, take a look at the Chevrolet City Express category.