Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Chevrolet Captiva is one of the great classics. Even though this work is basic to accomplish, some of you are probably questioning why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Chevrolet Captiva? We will now answer these questions.

check-brake-fluid-level-chevrolet-captiva

Advantage to always have the brake fluid level up in your Chevrolet Captiva

So we begin our article with the benefit of looking at the brake fluid level on a Chevrolet Captiva. This fluid has a crucial function on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that after a while you may lose brake fluid without any particular leak (without any leakage). It is therefore essential to examine the brake fluid level of your Chevrolet Captiva regularly (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid will lose its properties. This operation is extremely simple and does not require amazing experience of mechanics, so it is easy for all Chevrolet Captiva owners to do it themselves. If the Brake light on the dashboard of your Chevrolet Captiva does not correspond to a lack of brake fluid, do not be reluctant to seek advice from our article for details. On the other hand, there are some safety measures and rules to respect that we will see in the following part of this article.

How to fill up the brake fluid of a Chevrolet Captiva

So now we will learn to you how to do the brake fluid level on a Chevrolet Captiva. Please note that this is very elementary to perform. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this info in the user manual of your Chevrolet Captiva. Now here are the steps to adhere to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to locate, it is in most cases made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once found, read the instructions on the cap mindfully so as not to make any mistakes during the operation, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Chevrolet Captiva up to the mark “Max”.
  • If the level was below the “Min” mark before you checked the brake fluid level in your Chevrolet Captiva, make sure you examine the level in a few days/weeks to ensure that you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to securely fill the brake fluid level of your Chevrolet Captiva.

Whenever you have any further questions about the Chevrolet Captiva, do not hesitate to consult our Chevrolet Captiva category.