Among the small service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Chevrolet Avalanche is one of the most classics. Although this work is basic to do, some of you are likely concerned about why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Chevrolet Avalanche? We will now answer these questions.

check-brake-fluid-level-chevrolet-avalanche

Benefit to always have the brake fluid level up in your Chevrolet Avalanche

So we commence our content with the benefit of verifying the brake fluid level on a Chevrolet Avalanche. This fluid has an essential function on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is consequently very important to examine the brake fluid level of your Chevrolet Avalanche regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid loses its features. This operation is extremely simple and does not require amazing experience of mechanics, so it is easy for all Chevrolet Avalanche owners to do it themselves. If the Brake light on the dashboard of your Chevrolet Avalanche does not correspond to a lack of brake fluid, do not think twice to seek advice from our content for details. However, there are some precautions and rules to follow that we will check out in the following part of this content.

How to fill up the brake fluid of a Chevrolet Avalanche

So now we will show to you how to do the brake fluid level on a Chevrolet Avalanche. Please take note that this is very simple to carry out. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this data in the user manual of your Chevrolet Avalanche. Now here are the steps to adhere to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to find, it is generally made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
  • Once located, read the instructions on the cap cautiously so as not to make any mistakes within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Chevrolet Avalanche up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Chevrolet Avalanche, remember to examine the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Chevrolet Avalanche.

In the event that you have any additional questions about the Chevrolet Avalanche, do not hesitate to consult our Chevrolet Avalanche category.