Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Cadillac SRX is one of the great classics. Although this work is simple to execute, some of you are almost certainly concerned about why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Cadillac SRX? We will now answer these questions.

check-brake-fluid-level-cadillac-srx

Benefit to always have the brake fluid level up in your Cadillac SRX

So we start our content with the benefit of verifying the brake fluid level on a Cadillac SRX. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is consequently fundamental to verify the brake fluid level of your Cadillac SRX frequently (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid will lose its properties. This operation is extremely simple and does not require advanced expertise of mechanics, so it is easy for all Cadillac SRX owners to do it themselves. If the Brake light on the dashboard of your Cadillac SRX does not correspond to a lack of brake fluid, do not be reluctant to have a look at our content for details. On the other hand, there are some safety measures and rules to follow that we will check out in the following section of this content.

How to fill up the brake fluid of a Cadillac SRX

So now we will learn to you how to do the brake fluid level on a Cadillac SRX. Please note that this is very basic to do. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this information in the user manual of your Cadillac SRX. Now here are the steps to adhere to to make your level:

  • Open your hood and situate your brake fluid reservoir, it is very easy to find, it is generally made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once identified, browse the instructions on the cap carefully so as not to make any mistakes during the operation, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Cadillac SRX up to the mark “Max”.
  • If the level was below the “Min” mark before you checked the brake fluid level in your Cadillac SRX, make sure verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to safely and securely fill the brake fluid level of your Cadillac SRX.

If you want more guides on the Cadillac SRX, go to our Cadillac SRX category.