Among the small service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Buick Lucerne is one of the great classics. Even though this work is simple to do, some of you are almost certainly trying to figure out why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Buick Lucerne? We will now answer these questions.


Benefit to always have the brake fluid level up in your Buick Lucerne

So we begin our article content with the interest of verifying the brake fluid level on a Buick Lucerne. This fluid has a fundamental function on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is consequently important to examine the brake fluid level of your Buick Lucerne frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid loses its properties. This procedure is extremely simple and does not require evolved experience of mechanics, so it is easy for all Buick Lucerne owners to do it on their own. If the Brake light on the dashboard of your Buick Lucerne does not correspond to a lack of brake fluid, do not hesitate to browse our article content for details. On the other hand, there are some safety measures and rules to follow that we will notice in the up coming part of this article content.

How to fill up the brake fluid of a Buick Lucerne

So now we will learn to you how to do the brake fluid level on a Buick Lucerne. Please notice that this is very simple to carry out. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this info in the user manual of your Buick Lucerne. Now here are the steps to stick to to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to situate, it is usually made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once located, browse the instructions on the cap carefully so as not to make any problems within the the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Buick Lucerne up to the mark “Max”.
  • If the level was beneath the “Min” mark before you checked the brake fluid level in your Buick Lucerne, make sure to examine the level in a few days/weeks to be certain you don’t have a leak in the brake system

That’s it, you now have all the data you need to properly fill the brake fluid level of your Buick Lucerne.

In the event that you have any additional questions about the Buick Lucerne, do not hesitate to consult our Buick Lucerne category.