Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Buick Enclave is one of the great classics. Nevertheless this act is simple to conduct, some of you are most probably wanting to know why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Buick Enclave? We will now answer these questions.
Advantage to always have the brake fluid level up in your Buick Enclave
So we commence our article with the interest of checking the brake fluid level on a Buick Enclave. This fluid has a crucial role on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is therefore essential to verify the brake fluid level of your Buick Enclave often (every 10,000km for example). It is also wise to flush the system every 50,000km because as time passes the brake fluid loses its attributes. This procedure is really simple and does not require advanced experience of mechanics, so it is easy for all Buick Enclave owners to do it themselves. If the Brake light on the dashboard of your Buick Enclave does not correspond to a lack of brake fluid, do not hesitate to browse our article for details. However, there are some safety measures and rules to respect that we will check out in the following section of this article.
How to fill up the brake fluid of a Buick Enclave
So now we will learn to you how to do the brake fluid level on a Buick Enclave. Please be aware that this is very basic to carry out. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this info in the user manual of your Buick Enclave. Now here are the steps to stick to to make your level:
- Open your bonnet and identify your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
- Once discovered, examine the instructions on the cap mindfully so as not to make any problems within the the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Buick Enclave up to the mark “Max”.
- If the level was below the “Min” mark before you inspected the brake fluid level in your Buick Enclave, make sure verify the level in a few days/weeks to be sure you don’t have a leak in the brake system
That’s it, you now have all the information you need to securely fill the brake fluid level of your Buick Enclave.
If you wish more tutorials on the Buick Enclave, go to our Buick Enclave category.