Among the small service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your BMW X4 is one of the great classics. Although this act is basic to conduct, some of you are probably wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your BMW X4? We will now answer these questions.


Advantage to always have the brake fluid level up in your BMW X4

So we commence our article with the benefit of verifying the brake fluid level on a BMW X4. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is as a result necessary to examine the brake fluid level of your BMW X4 on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid will lose its features. This procedure is specially simple and does not require evolved knowledge of mechanics, so it is easy for all BMW X4 owners to do it on their own. If the Brake light on the dashboard of your BMW X4 does not correspond to a lack of brake fluid, do not think twice to have a look at our article for details. On the other hand, there are some safety measures and rules to follow that we will discover in the following section of this article.

How to fill up the brake fluid of a BMW X4

So now we will show to you how to do the brake fluid level on a BMW X4. Please take note that this is very simple to complete. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this data in the user manual of your BMW X4. Now here are the steps to stick to to make your level:

  • Open your cover and find your brake fluid reservoir, it is very easy to find, it is usually made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
  • Once located, read the instructions on the cap carefully so as not to make any mistakes during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your BMW X4 up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your BMW X4, remember to examine the level in a few days/weeks to be sure you don’t have a leak in the brake system

That’s it, you now have all the info you need to safely and securely fill the brake fluid level of your BMW X4.

To discover more tips on the BMW X4, take a look at the BMW X4 category.