Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Bmw X2 is one of the most classics. Although this work is simple to conduct, some of you are most probably wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Bmw X2? We will now answer these questions.

check-brake-fluid-level-bmw-x2

Advantage to always have the brake fluid level up in your Bmw X2

So we begin our article with the significance of checking the brake fluid level on a Bmw X2. This fluid has an important function on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is consequently very important to verify the brake fluid level of your Bmw X2 regularly (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid will lose its features. This procedure is specially simple and does not require amazing expertise of mechanics, so it is easy for all Bmw X2 owners to do it themselves. If the Brake light on the dashboard of your Bmw X2 does not correspond to a lack of brake fluid, do not think twice to read our article for details. Nevertheless, there are some measures and rules to follow that we will see in the following part of this article.

How to fill up the brake fluid of a Bmw X2

So now we will describe to you how to do the brake fluid level on a Bmw X2. Please note that this is very basic to perform. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this information in the user manual of your Bmw X2. Now here are the steps to stick to to make your level:

  • Open your hood and situate your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once discovered, read the instructions on the cap carefully so as not to make any problems during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Bmw X2 up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Bmw X2, be sure to verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Bmw X2.

To find more tips on the Bmw X2, take a look at the Bmw X2 category.