Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Bmw Serie 3 is one of the great classics. Although this act is simple to accomplish, some of you are likely trying to figure out why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Bmw Serie 3? We will now answer these questions.

check-brake-fluid-level-bmw-serie-3

Benefit to always have the brake fluid level up in your Bmw Serie 3

So we begin our guideline with the interest of looking at the brake fluid level on a Bmw Serie 3. This fluid has an essential role on your car, transmit the braking power to the wheels and thus stop your car. However, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is as a result essential to examine the brake fluid level of your Bmw Serie 3 often (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid will lose its properties. This process is extremely simple and does not require advanced expertise of mechanics, so it is easy for all Bmw Serie 3 owners to do it on their own. If the Brake light on the dashboard of your Bmw Serie 3 does not match to a lack of brake fluid, do not hesitate to seek advice from our guideline for details. However, there are some safety measures and rules to follow that we will notice in the next section of this guideline.

How to fill up the brake fluid of a Bmw Serie 3

So now we will show to you how to do the brake fluid level on a Bmw Serie 3. Please take note that this is very simple to carry out. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this information in the user manual of your Bmw Serie 3. Now here are the steps to adhere to to make your level:

  • Open your bonnet and situate your brake fluid reservoir, it is very easy to situate, it is in most cases made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once found, browse the instructions on the cap mindfully so as not to make any problems during the process, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Bmw Serie 3 up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your Bmw Serie 3, be sure to examine the level in a few days/weeks to ensure that you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to safely fill the brake fluid level of your Bmw Serie 3.

To discover more tips on the Bmw Serie 3, take a look at the Bmw Serie 3 category.