Among the small service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Bmw Serie 3 E90 is one of the great classics. Although this process is basic to complete, some of you are most likely questioning why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Bmw Serie 3 E90? We will now answer these questions.
Benefit to always have the brake fluid level up in your Bmw Serie 3 E90
So we begin our content page with the significance of verifying the brake fluid level on a Bmw Serie 3 E90. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is consequently important to verify the brake fluid level of your Bmw Serie 3 E90 often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid will lose its characteristics. This procedure is specially simple and does not require evolved expertise of mechanics, so it is easy for all Bmw Serie 3 E90 owners to do it themselves. If the Brake light on the dashboard of your Bmw Serie 3 E90 does not match to a lack of brake fluid, do not be reluctant to consult our content page for details. On the other hand, there are some safety measures and rules to follow that we will see in the next section of this content page.
How to fill up the brake fluid of a Bmw Serie 3 E90
So now we will show to you how to do the brake fluid level on a Bmw Serie 3 E90. Please note that this is very elementary to do. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this information in the user manual of your Bmw Serie 3 E90. Now here are the steps to adhere to to make your level:
- Open your hood and locate your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
- Once established, browse the instructions on the cap mindfully so as not to make any problems during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Bmw Serie 3 E90 up to the mark “Max”.
- If the level was below the “Min” mark before you examined the brake fluid level in your Bmw Serie 3 E90, make sure you verify the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Bmw Serie 3 E90.
To find more tips on the Bmw Serie 3 E90, take a look at the Bmw Serie 3 E90 category.
