Among the small routine service acts that you should do regularly on your car, to fill up the brake fluid level of your Bmw Serie 2 F23 is one of the most classics. Nevertheless this act is basic to execute, some of you are most likely wanting to know why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Bmw Serie 2 F23? We will now answer these questions.

check-brake-fluid-level-bmw-serie-2-f23

Advantage to always have the brake fluid level up in your Bmw Serie 2 F23

So we begin our article content with the significance of verifying the brake fluid level on a Bmw Serie 2 F23. This fluid has a fundamental function on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is consequently essential to check the brake fluid level of your Bmw Serie 2 F23 often (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid loses its attributes. This operation is specially simple and does not require evolved expertise of mechanics, so it is easy for all Bmw Serie 2 F23 owners to do it on their own. If the Brake light on the dashboard of your Bmw Serie 2 F23 does not correspond to a lack of brake fluid, do not think twice to seek advice from our article content for details. However, there are some safety measures and rules to respect that we will notice in the up coming section of this article content.

How to fill up the brake fluid of a Bmw Serie 2 F23

So now we will learn to you how to do the brake fluid level on a Bmw Serie 2 F23. Please take note that this is very basic to do. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this information in the user manual of your Bmw Serie 2 F23. Now here are the steps to follow to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to identify, it is in most cases made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once discovered, browse the instructions on the cap attentively so as not to make any mistakes during the operation, we recommend you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Bmw Serie 2 F23 up to the mark “Max”.
  • If the level was under the “Min” mark before you examined the brake fluid level in your Bmw Serie 2 F23, make sure to check the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Bmw Serie 2 F23.

If you wish more tutorials on the Bmw Serie 2 F23, go to our Bmw Serie 2 F23 category.