Among the small service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Bmw Serie 1 is one of the great classics. Although this process is simple to execute, some of you are most probably trying to figure out why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Bmw Serie 1? We will now answer these questions.
Benefit to always have the brake fluid level up in your Bmw Serie 1
So we start our article content with the benefit of checking the brake fluid level on a Bmw Serie 1. This fluid has a fundamental task on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that with time you may lose brake fluid in the normal way (without any leakage). It is as a result very important to verify the brake fluid level of your Bmw Serie 1 on a regular basis (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid loses its features. This process is particularly simple and does not require evolved knowledge of mechanics, so it is easy for all Bmw Serie 1 owners to do it themselves. If the Brake light on the dashboard of your Bmw Serie 1 does not correspond to a lack of brake fluid, do not hesitate to have a look at our article content for details. On the other hand, there are some measures and rules to follow that we will discover in the following section of this article content.
How to fill up the brake fluid of a Bmw Serie 1
So now we will explain to you how to do the brake fluid level on a Bmw Serie 1. Please note that this is very basic to perform. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this info in the user manual of your Bmw Serie 1. Now here are the steps to follow to make your level:
- Open your hood and situate your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
- Once established, read the instructions on the cap attentively so as not to make any problems within the the process, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Bmw Serie 1 up to the mark “Max”.
- If the level was below the “Min” mark before you examined the brake fluid level in your Bmw Serie 1, make sure you verify the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Bmw Serie 1.
To get more tips on the Bmw Serie 1, take a look at the Bmw Serie 1 category.
