Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your BMW 2 Series is one of the most classics. Although this action is very easy to carry out, some of you are likely trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your BMW 2 Series? We will now answer these questions.
Advantage to always have the brake fluid level up in your BMW 2 Series
So we begin our content with the significance of verifying the brake fluid level on a BMW 2 Series. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is as a result fundamental to verify the brake fluid level of your BMW 2 Series regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid will lose its attributes. This operation is particularly simple and does not require evolved expertise of mechanics, so it is easy for all BMW 2 Series owners to do it themselves. If the Brake light on the dashboard of your BMW 2 Series does not match to a lack of brake fluid, do not hesitate to read our content for details. However, there are some measures and rules to follow that we will see in the following section of this content.
How to fill up the brake fluid of a BMW 2 Series
So now we will learn to you how to do the brake fluid level on a BMW 2 Series. Please take note that this is very simple to perform. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this info in the user manual of your BMW 2 Series. Now here are the steps to adhere to to make your level:
- Open your bonnet and locate your brake fluid reservoir, it is very easy to locate, it is in most cases made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
- Once identified, examine the instructions on the cap attentively so as not to make any problems during the operation, we suggest you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your BMW 2 Series up to the mark “Max”.
- If the level was under the “Min” mark before you examined the brake fluid level in your BMW 2 Series, make sure you verify the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your BMW 2 Series.
To get more tips on the BMW 2 Series, take a look at the BMW 2 Series category.
