Among the small routine service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Audi Rs6 is one of the great classics. Nevertheless this act is elementary to carry out, some of you are most probably questioning why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Audi Rs6? We will now answer these questions.

check-brake-fluid-level-audi-rs6

Advantage to always have the brake fluid level up in your Audi Rs6

So we begin our content with the benefit of looking at the brake fluid level on a Audi Rs6. This fluid has a vital function on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is as a result important to check the brake fluid level of your Audi Rs6 frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because as time passes the brake fluid loses its characteristics. This process is really simple and does not require advanced experience of mechanics, so it is easy for all Audi Rs6 owners to do it on their own. If the Brake light on the dashboard of your Audi Rs6 does not correspond to a lack of brake fluid, do not be reluctant to read our content for details. On the other hand, there are some safety measures and rules to respect that we will see in the up coming section of this content.

How to fill up the brake fluid of a Audi Rs6

So now we will describe to you how to do the brake fluid level on a Audi Rs6. Please note that this is very elementary to do. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this data in the user manual of your Audi Rs6. Now here are the steps to adhere to to make your level:

  • Open your bonnet and situate your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is placed on top of the master cylinder (metal part) and has a yellow cap.
  • Once established, read the instructions on the cap attentively so as not to make any mistakes within the the process, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi Rs6 up to the mark “Max”.
  • If the level was below the “Min” mark before you checked the brake fluid level in your Audi Rs6, make sure you check the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Audi Rs6.

In the event that you have any further questions about the Audi Rs6, do not hesitate to consult our Audi Rs6 category.