Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Audi Rs5 is one of the most classics. Even though this action is very easy to do, some of you are most likely attempting to find why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Audi Rs5? We will now answer these questions.

check-brake-fluid-level-audi-rs5

Advantage to always have the brake fluid level up in your Audi Rs5

So we begin our article content with the interest of looking at the brake fluid level on a Audi Rs5. This fluid has an essential role on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is as a result important to examine the brake fluid level of your Audi Rs5 frequently (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid will lose its properties. This procedure is particularly simple and does not require evolved knowledge of mechanics, so it is easy for all Audi Rs5 owners to do it themselves. If the Brake light on the dashboard of your Audi Rs5 does not correspond to a lack of brake fluid, do not hesitate to browse our article content for details. On the other hand, there are some measures and rules to respect that we will discover in the next part of this article content.

How to fill up the brake fluid of a Audi Rs5

So now we will show to you how to do the brake fluid level on a Audi Rs5. Please take note that this is very simple to do. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this information in the user manual of your Audi Rs5. Now here are the steps to adhere to to make your level:

  • Open your cover and find your brake fluid reservoir, it is very easy to situate, it is generally made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
  • Once discovered, browse the instructions on the cap carefully so as not to make any problems during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Audi Rs5 up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Audi Rs5, make sure to examine the level in a few days/weeks to ensure that you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to securely fill the brake fluid level of your Audi Rs5.

To discover more tips on the Audi Rs5, take a look at the Audi Rs5 category.