Among the small maintenance works that you should do on a regular basis on your car, to fill up the brake fluid level of your Audi A6 is one of the great classics. Nevertheless this process is elementary to accomplish, some of you are most probably wondering why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Audi A6? We will now answer these questions.


Benefit to always have the brake fluid level up in your Audi A6

So we start our content with the significance of looking at the brake fluid level on a Audi A6. This fluid has a crucial task on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that after a while you may lose brake fluid without any particular leak (without any leakage). It is as a result imperative to examine the brake fluid level of your Audi A6 frequently (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid loses its characteristics. This procedure is extremely simple and does not require amazing expertise of mechanics, so it is easy for all Audi A6 owners to do it on their own. If the Brake light on the dashboard of your Audi A6 does not match to a lack of brake fluid, do not hesitate to browse our content for details. Nevertheless, there are some measures and rules to respect that we will see in the up coming part of this content.

How to fill up the brake fluid of a Audi A6

So now we will explain to you how to do the brake fluid level on a Audi A6. Please be aware that this is very simple to accomplish. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this data in the user manual of your Audi A6. Now here are the steps to stick to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to situate, it is in general made of whitish/transparent plastic, it is based above the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, read the instructions on the cap mindfully so as not to make any problems during the procedure, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Audi A6 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Audi A6, make sure you examine the level in a few days/weeks to make sure you don’t have a leak in the brake system

That’s it, you now have all the info you need to properly fill the brake fluid level of your Audi A6.

If perhaps you have any further questions about the Audi A6, do not hesitate to consult our Audi A6 category.