Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Audi A5 is one of the most classics. Although this action is very easy to execute, some of you are probably questioning why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Audi A5? We will now answer these questions.


Advantage to always have the brake fluid level up in your Audi A5

So we start our article content with the benefit of verifying the brake fluid level on a Audi A5. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your car. However, it is possible that with time you may lose brake fluid in the normal way (without any leakage). It is therefore essential to examine the brake fluid level of your Audi A5 regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid loses its properties. This operation is specially simple and does not require advanced knowledge of mechanics, so it is easy for all Audi A5 owners to do it on their own. If the Brake light on the dashboard of your Audi A5 does not correspond to a lack of brake fluid, do not hesitate to have a look at our article content for details. However, there are some precautions and rules to respect that we will see in the following section of this article content.

How to fill up the brake fluid of a Audi A5

So now we will explain to you how to do the brake fluid level on a Audi A5. Please be aware that this is very elementary to do. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this info in the user manual of your Audi A5. Now here are the steps to stick to to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once discovered, examine the instructions on the cap mindfully so as not to make any problems during the operation, we recommend you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi A5 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Audi A5, remember to examine the level in a few days/weeks to ensure that you don’t have a leak in the brake system

That’s it, you now have all the info you need to properly fill the brake fluid level of your Audi A5.

Whenever you have any further questions about the Audi A5, do not hesitate to consult our Audi A5 category.