Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Audi A4 is one of the most classics. Although this work is elementary to accomplish, some of you are likely wanting to know why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Audi A4? We will now answer these questions.
Advantage to always have the brake fluid level up in your Audi A4
So we commence our content page with the interest of looking at the brake fluid level on a Audi A4. This fluid has an important function on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is as a result fundamental to examine the brake fluid level of your Audi A4 often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid loses its attributes. This procedure is particularly simple and does not require evolved expertise of mechanics, so it is easy for all Audi A4 owners to do it themselves. If the Brake light on the dashboard of your Audi A4 does not correspond to a lack of brake fluid, do not think twice to seek advice from our content page for details. Nevertheless, there are some measures and rules to follow that we will see in the up coming section of this content page.
How to fill up the brake fluid of a Audi A4
So now we will show to you how to do the brake fluid level on a Audi A4. Please note that this is very basic to accomplish. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this data in the user manual of your Audi A4. Now here are the steps to stick to to make your level:
- Open your bonnet and situate your brake fluid reservoir, it is very easy to situate, it is in most cases made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
- Once found, examine the instructions on the cap carefully so as not to make any mistakes within the the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi A4 up to the mark “Max”.
- If the level was under the “Min” mark before you checked the brake fluid level in your Audi A4, remember to examine the level in a few days/weeks to be sure you don’t have a leak in the brake system
.
That’s it, you now have all the information you need to properly fill the brake fluid level of your Audi A4.
If perhaps you have any additional questions about the Audi A4, do not hesitate to consult our Audi A4 category.
