Among the small service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Alfa Romeo 156 is one of the most classics. Nevertheless this act is very easy to perform, some of you are likely trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Alfa Romeo 156? We will now answer these questions.

check-brake-fluid-level-alfa-romeo-156

Benefit to always have the brake fluid level up in your Alfa Romeo 156

So we commence our guideline with the interest of verifying the brake fluid level on a Alfa Romeo 156. This fluid has a vital function on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is therefore necessary to examine the brake fluid level of your Alfa Romeo 156 on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid loses its properties. This procedure is specially simple and does not require evolved experience of mechanics, so it is easy for all Alfa Romeo 156 owners to do it on their own. If the Brake light on the dashboard of your Alfa Romeo 156 does not match to a lack of brake fluid, do not be reluctant to seek advice from our guideline for details. However, there are some safety measures and rules to follow that we will notice in the up coming section of this guideline.

How to fill up the brake fluid of a Alfa Romeo 156

So now we will learn to you how to do the brake fluid level on a Alfa Romeo 156. Please notice that this is very basic to do. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this information in the user manual of your Alfa Romeo 156. Now here are the steps to follow to make your level:

  • Open your hood and situate your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
  • Once identified, examine the instructions on the cap carefully so as not to make any mistakes within the the procedure, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Alfa Romeo 156 up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Alfa Romeo 156, make sure to examine the level in a few days/weeks to be certain you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Alfa Romeo 156.

To find more tips on the Alfa Romeo 156, take a look at the Alfa Romeo 156 category.