Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Acura RDX is one of the great classics. Although this process is elementary to carry out, some of you are most likely wanting to know why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Acura RDX? We will now answer these questions.


Benefit to always have the brake fluid level up in your Acura RDX

So we start our guideline with the benefit of looking at the brake fluid level on a Acura RDX. This fluid has a vital task on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is as a result necessary to check the brake fluid level of your Acura RDX often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because over time the brake fluid loses its attributes. This process is extremely simple and does not require amazing experience of mechanics, so it is easy for all Acura RDX owners to do it themselves. If the Brake light on the dashboard of your Acura RDX does not match to a lack of brake fluid, do not be reluctant to consult our guideline for details. On the other hand, there are some measures and rules to respect that we will notice in the next part of this guideline.

How to fill up the brake fluid of a Acura RDX

So now we will explain to you how to do the brake fluid level on a Acura RDX. Please be aware that this is very basic to perform. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Acura RDX. Now here are the steps to stick to to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once discovered, examine the instructions on the cap carefully so as not to make any mistakes within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Acura RDX up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Acura RDX, make sure check the level in a few days/weeks to ensure you don’t have a leak in the brake system

That’s it, you now have all the info you need to safely and securely fill the brake fluid level of your Acura RDX.

If you wish more guides on the Acura RDX, go to our Acura RDX category.