No matter it’s for your own security, for roadworthiness testing or for your wallet, being certain your headlight bulbs are actually functional is fundamental. Actually, bulbs are wearing parts that will unavoidably burn out in the long run and therefore need to be replaced. You’re most likely here because one of your headlights is burnt out and you’re concerned about how to change the bulb of the fog lights on your Scion tC, we’ve posted this article content to help you do this process on your own and not need to go to your repair shop. To begin with ,, we will look at chaging the front fog light bulb of your Scion tC and secondly, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Scion tC?
We are going to commence this article content with the swapping the front fog light bulb of your Scion tC, you should know that dependent on the year and the finish of your car it may not be the exact method to use, that’s why we are going to give you the two most common strategies to change the front fog light bulb of your car.
Change the front fog light bulb of your Scion tC without removing the bumper.
First option, we will swap the bulb without removing the bumper of your car. Although this process is the least difficult, there is no guarantee that you can perform it on your automobile. Actually, determined by the options and the year, on some models there will not be enough room for you to change the bulb in this manner. Here are the two different techniques to change the front fog lamp bulb of your Scion tC:
- By going under the bumper of your Scion tC: First technique, you will position yourself under your automobile, don’t hesitate to raise it with a jack if you don’t have enough room under the bumper. Once under the automobile, all you have to do is to remove the clips of the plastic shoe that covers your engine motor and that rests on your bumper, you will have access to the fog light block of your Scion tC and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and at last swap the front fog light bulb of your Scion tC
- By removing the wheel arch: Second solution, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To do this, lift your automobile up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and carry out the same process as detailed earlier to change the bulb of the fog light of your Scion tC.
How to change the front fog light bulb of your Scion tC by removing the bumper?
We will now check out the case where you are obliged by lack of room on your car model to remove the bumper of your Scion tC in order to gain access to the front fog light bulb of your car. To do this, you will first have to remove the front bumper of your Scion tC, do not think twice to consult our complete article to know the exact procedure, know to summarize, that you will need torx wrench, and that you will have to remove screws under your cover, in your wheel arches and under your automobile. Once the bumper has been taken away, you will only need to access the front fog lamp block and change the fog lamp bulb on your Scion tC in the same technique as described earlier.
How to change the rear fog light bulb on your Scion tC?
Finally, if you desire to change the rear fog bulb of your car the method is much easier, here are the different steps to follow to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Scion tC.
- After finding the rear fog light bulb on your car, remove the burnt-out bulb
- Place your new rear fog light bulb into the headlamp block of your Scion tC
- Put everything back again
Verify that your fog lights are working correctly again before you hit the road and you’re done.
To get more tips on the Scion tC, take a look at the Scion tC category.
.
