Regardless it’s for your own safety, for roadworthiness testing or for your budget, ensuring your headlight bulbs are all the time working is imperative. Actually, bulbs are wearing parts that will obviously burn out in the long run and as a result need to be replaced. You’re likely on this page because one of your headlights is burnt out and you’re wanting to know how to change the bulb of the fog lights on your Opel Vectra, we’ve made this article to help you do this process without help and not need to go to your mechanic. First of all, we will look at chaging the front fog light bulb of your Opel Vectra and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Opel Vectra?
We are gonna commence this article with the swapping the front fog light bulb of your Opel Vectra, you should know that based on the year and the finish of your car it may not be the exact method to use, that’s why we are going to give you the two most common ways to change the front fog light bulb of your vehicle.
Change the front fog light bulb of your Opel Vectra without removing the bumper.
First technique, we will swap the bulb without removing the bumper of your car. Nevertheless this strategy is the easiest, there is no assurance that you can perform it on your vehicle. Actually, depending on the options and the year, on some models there will not be enough space for you to change the bulb in this manner. Here are the two different ways to change the front fog lamp bulb of your Opel Vectra:
- By going under the bumper of your Opel Vectra: First technique, you will position yourself under your vehicle, don’t be reluctant to raise it with a jack if you don’t have enough space under the bumper. Once under the vehicle, all you have to do is to remove the clips of the plastic shoe that covers your engine unit and that rests on your bumper, you will have access to the fog light block of your Opel Vectra and you will not have any more (if you have enough space) remove the plastic cover, disconnect the plug, press on the metal part to take out the bulb and finally swap the front fog light bulb of your Opel Vectra
- By removing the wheel arch: Second solution, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To accomplish this, jack your vehicle up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and perform the same process as explained above to change the bulb of the fog light of your Opel Vectra.
How to change the front fog light bulb of your Opel Vectra by removing the bumper?
We will at this point take a look at the case where you are obliged by lack of space on your car model to remove the bumper of your Opel Vectra in order to access the front fog light bulb of your car. To do so, you will first have to remove the front bumper of your Opel Vectra, do not hesitate to browse our complete article to find out the exact operation, know to summarize, that you will need torx wrench, and that you will have to remove screws under your bonnet, in your wheel arches and under your vehicle. Once the bumper has been taken away, you will only need to access the front fog lamp block and replace the fog lamp bulb on your Opel Vectra in the same technique as stated above.
How to change the rear fog light bulb on your Opel Vectra?
To finish, if you want to change the rear fog bulb of your car the method is much simpler, here are the different steps to stick to to allow you to replace this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Opel Vectra.
- After discovering the rear fog light bulb on your car, remove the burnt-out bulb
- Put in your new rear fog light bulb into the headlamp block of your Opel Vectra
- Put everything back again
Check that your fog lights are working properly again before you hit the road and you’re done.
To discover more tips on the Opel Vectra, take a look at the Opel Vectra category.
.
