Regardless whether it’s for your own security, for roadworthiness tests or for your budget, making sure your headlight bulbs are actually operational is extremely important. In reality, bulbs are wearing parts that will obviously burn out over time and as a consequence need to be changed. You’re likely on this website because one of your headlights is burnt out and you’re wondering how to change the bulb of the fog lights on your Mazda Mx5, we’ve posted this content to help you do this process by yourself and not need to go to your auto mechanic. To start with ,, we will look at chaging the front fog light bulb of your Mazda Mx5 and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Mazda Mx5?
We are going to begin this content with the swapping the front fog light bulb of your Mazda Mx5, you should know that determined by the year and the finish of your car it may not be the exact process to employ, that’s why we are going to give you the two most common solutions to replace the front fog light bulb of your vehicle.
Change the front fog light bulb of your Mazda Mx5 without removing the bumper.
First method, we will replace the bulb without removing the bumper of your car. Even though this process is the least complicated, there is no guarantee that you can perform it on your car. In reality, based on the options and the year, on some models there will not be enough room for you to change the bulb in this manner. Here are the two different methods to change the front fog lamp bulb of your Mazda Mx5:
- By passing under the bumper of your Mazda Mx5: First technique, you will position yourself under your car, don’t hesitate to raise it with a jack if you don’t have enough room under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that covers your engine and that rests on your bumper, you will have access to the fog light block of your Mazda Mx5 and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and finally swap the front fog light bulb of your Mazda Mx5
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To make this happen, jack your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and carry out the same process as explained above to change the bulb of the fog light of your Mazda Mx5.
How to change the front fog light bulb of your Mazda Mx5 by removing the bumper?
We will now look at the circumstance where you are obliged by lack of room on your car model to remove the bumper of your Mazda Mx5 in order to access the front fog light bulb of your car. To accomplish this, you will first of all have to remove the front bumper of your Mazda Mx5, do not be reluctant to have a look to our complete instruction to know the exact procedure, know to summarize, that you will need torx wrench, and that you will have to remove screws under your cover, in your wheel arches and under your car. Once the bumper has been removed, you will only need to access the front fog lamp block and change the fog lamp bulb on your Mazda Mx5 in the same procedure as stated above.
How to change the rear fog light bulb on your Mazda Mx5?
To finish, if you want to change the rear fog bulb of your car the process is much easier, here are the different steps to stick to to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Mazda Mx5.
- After finding the rear fog light bulb on your car, remove the burnt-out bulb
- Insert your new rear fog light bulb into the headlamp block of your Mazda Mx5
- Put everything back in place
Check that your fog lights are working properly again before you hit the road and you’re done.
If you want more tutorials on the Mazda Mx5, go to our Mazda Mx5 category.
.
