No matter it’s for your own security, for roadworthiness evaluation or for your wallet, being sure your headlight bulbs are always efficient is necessary. Actually, bulbs are wearing parts that will inevitably burn out over time and consequently need to be changed. You’re probably in this article because one of your headlights is burnt out and you’re wanting to know how to change the bulb of the fog lights on your Honda E, we’ve posted this content page to help you do this operation by yourself and not need to go to your repair shop. First of all, we will look at chaging the front fog light bulb of your Honda E and secondly, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Honda E?
We are going to commence this content page with the changing the front fog light bulb of your Honda E, remember that based on the year and the finish of your car it may not be the exact process to use, that’s why we are going to give you the two most common techniques to change the front fog light bulb of your vehicle.
Change the front fog light bulb of your Honda E without removing the bumper.
First option, we will swap the bulb without dismantling the bumper of your car. Despite the fact this process is the least complicated, there is no guarantee that you can perform it on your car. Actually, depending on the options and the year, on some models there will not be enough room for you to change the bulb in this manner. Here are the two different ways to change the front fog lamp bulb of your Honda E:
- By going under the bumper of your Honda E: First approach, you will position yourself under your car, don’t hesitate to raise it with a jack if you don’t have enough room under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that covers your engine motor and that rests on your bumper, you will have access to the fog light block of your Honda E and you will not have any more (if you have enough space) remove the plastic cover, disconnect the plug, press on the metal part to take out the bulb and at last change the front fog light bulb of your Honda E
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To accomplish this, jack your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and execute the same operation as mentioned earlier to change the bulb of the fog light of your Honda E.
How to change the front fog light bulb of your Honda E by removing the bumper?
We will at this point check out the case where you are obliged by lack of room on your car model to remove the bumper of your Honda E in order to access the front fog light bulb of your car. To accomplish this, you will first have to remove the front bumper of your Honda E, do not hesitate to read our complete instruction to find out the exact operation, know to summarize, that you will need torx wrench, and that you will have to remove screws under your hood, in your wheel arches and under your car. Once the bumper has been taken away, you will only need to access the front fog lamp block and replace the fog lamp bulb on your Honda E in the same technique as mentioned earlier.
How to change the rear fog light bulb on your Honda E?
To finish, if you want to change the rear fog bulb of your car the process is much simpler, here are the different steps to follow to allow you to replace this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Honda E.
- After discovering the rear fog light bulb on your car, remove the burnt-out bulb
- Put in your new rear fog light bulb into the headlamp block of your Honda E
- Put everything back again
Verify that your fog lights are working properly again before you hit the road and you’re done.
To get more tips on the Honda E, take a look at the Honda E category.
.
