Whether it’s for your own security, for roadworthiness assessment or for your budget, being sure your headlight bulbs are actually operational is fundamental. The reality is, bulbs are wearing parts that will obviously burn out with time and consequently need to be replaced. You’re probably on this website because one of your headlights is burnt out and you’re wanting to know how to change the bulb of the fog lights on your Honda CR V, we’ve created this article content to help you do this procedure on your own and not need to go to your repair shop. Firstly, we will look at chaging the front fog light bulb of your Honda CR V and secondly, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Honda CR V?
We are going to start this article content with the replacing the front fog light bulb of your Honda CR V, remember that according to the year and the finish of your car it may not be the exact process to use, that’s why we are going to give you the two most traditional methods to replace the front fog light bulb of your car.
Change the front fog light bulb of your Honda CR V without removing the bumper.
First technique, we will swap the bulb without removing the bumper of your car. Despite the fact this method is the least complicated, there is no guarantee that you can carry it out on your car. The reality is, dependant upon the options and the year, on some models there will not be enough room for you to change the bulb in this way. Here are the two different solutions to change the front fog lamp bulb of your Honda CR V:
- By going under the bumper of your Honda CR V: First approach, you will position yourself under your car, don’t hesitate to lift it with a jack if you don’t have enough room under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that covers your engine motor and that rests on your bumper, you will have access to the fog light block of your Honda CR V and you will not have any more (if you have enough space) remove the plastic cover, disconnect the plug, press on the metal part to take out the bulb and finally swap the front fog light bulb of your Honda CR V
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To accomplish this, jack your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and carry out the same procedure as explained above to change the bulb of the fog light of your Honda CR V.
How to change the front fog light bulb of your Honda CR V by removing the bumper?
We will now look at the case where you are obliged by lack of room on your car model to remove the bumper of your Honda CR V to be able to gain access to the front fog light bulb of your car. To accomplish this, you will first have to remove the front bumper of your Honda CR V, do not think twice to consult our complete instruction to find out the exact operation, know to summarize, that you will need torx wrench, and that you will have to remove screws under your cover, in your wheel arches and under your car. Once the bumper has been taken away, you will only need to access the front fog lamp block and change the fog lamp bulb on your Honda CR V in the same technique as stated above.
How to change the rear fog light bulb on your Honda CR V?
At last, if you wish to change the rear fog bulb of your car the process is much easier, here are the different steps to follow to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Honda CR V.
- After locating the rear fog light bulb on your car, remove the burnt-out bulb
- Put in your new rear fog light bulb into the headlamp block of your Honda CR V
- Put everything back in place
Examine that your fog lights are working properly again before you hit the road and you’re done.
If you want more guides on the Honda CR V, go to our Honda CR V category.
.
