No matter it’s for your personal security, for roadworthiness assessment or for your budget, being sure your headlight bulbs are all the time working is really important. In fact, bulbs are wearing auto parts that will obviously burn out along with time and as a result need to be changed. You’re likely on this website because one of your headlights is burnt out and you’re wondering how to change the bulb of the fog lights on your GMC Yukon, we’ve made this content page to help you do this operation by yourself and not need to go to your auto mechanic. To begin with ,, we will look at chaging the front fog light bulb of your GMC Yukon and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my GMC Yukon?
We are gonna begin this content page with the swapping the front fog light bulb of your GMC Yukon, bear in mind that depending on the year and the finish of your car it may not be the exact technique to employ, that’s why we are going to give you the two most common strategies to replace the front fog light bulb of your car.
Change the front fog light bulb of your GMC Yukon without removing the bumper.
First solution, we will replace the bulb without removing the bumper of your car. Even though this process is the easiest, there is no assurance that you can carry it out on your car. In fact, dependant upon the options and the year, on some models there will not be enough room for you to change the bulb in this way. Here are the two different solutions to change the front fog lamp bulb of your GMC Yukon:
- By passing under the bumper of your GMC Yukon: First approach, you will position yourself under your car, don’t be reluctant to lift it with a jack if you don’t have enough room under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that protects your engine unit and that rests on your bumper, you will have access to the fog light block of your GMC Yukon and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and at last swap the front fog light bulb of your GMC Yukon
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To make this happen, lift your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and conduct the same operation as detailed above to change the bulb of the fog light of your GMC Yukon.
How to change the front fog light bulb of your GMC Yukon by removing the bumper?
We will now take a look at the circumstance where you are obliged by lack of room on your car model to remove the bumper of your GMC Yukon in order to access the front fog light bulb of your car. To achieve this, you will first of all have to remove the front bumper of your GMC Yukon, do not hesitate to browse our complete guideline to find out the exact process, know to summarize, that you will need torx wrench, and that you will have to remove screws under your cover, in your wheel arches and under your car. Once the bumper has been taken off, you will only need to access the front fog lamp block and change the fog lamp bulb on your GMC Yukon in the same way as described above.
How to change the rear fog light bulb on your GMC Yukon?
To finish, if you desire to change the rear fog bulb of your car the technique is much easier, here are the different steps to stick to to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your GMC Yukon.
- After finding the rear fog light bulb on your car, remove the burnt-out bulb
- Place your new rear fog light bulb into the headlamp block of your GMC Yukon
- Put everything back again
Verify that your fog lights are working correctly again before you hit the road and you’re done.
To get more tips on the GMC Yukon, take a look at the GMC Yukon category.
.
