Regardless whether it’s for your personal security, for roadworthiness testing or for your wallet, being sure your headlight bulbs are always working is extremely important. The reality is, bulbs are wearing auto parts that will inevitably burn out as time passes and as a consequence need to be changed. You’re almost certainly here because one of your headlights is burnt out and you’re concerned about how to change the bulb of the fog lights on your BMW X6, we’ve made this content page to help you do this operation without help and not need to go to your mechanic. To start with ,, we will look at chaging the front fog light bulb of your BMW X6 and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my BMW X6?
We are gonna commence this content page with the changing the front fog light bulb of your BMW X6, take note that determined by the year and the finish of your car it may not be the exact technique to utilise, that’s why we are going to give you the two most classical techniques to replace the front fog light bulb of your car.
Change the front fog light bulb of your BMW X6 without removing the bumper.
First option, we will replace the bulb without removing the bumper of your car. Despite the fact this strategy is the least difficult, there is no assurance that you can carry it out on your car. The reality is, based on the options and the year, on some models there will not be enough room for you to change the bulb in this way. Here are the two different techniques to change the front fog lamp bulb of your BMW X6:
- By passing under the bumper of your BMW X6: First technique, you will position yourself under your car, don’t be reluctant to raise it with a jack if you don’t have enough room under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that protects your engine motor and that rests on your bumper, you will have access to the fog light block of your BMW X6 and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and at last swap the front fog light bulb of your BMW X6
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To achieve this, jack your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and perform the same operation as described earlier to change the bulb of the fog light of your BMW X6.
How to change the front fog light bulb of your BMW X6 by removing the bumper?
We will now look at the case where you are obliged by lack of room on your car model to remove the bumper of your BMW X6 in order to access the front fog light bulb of your car. To do this, you will first of all have to remove the front bumper of your BMW X6, do not think twice to read our complete instruction to find out the exact operation, know to summarize, that you will need torx wrench, and that you will have to remove screws under your bonnet, in your wheel arches and under your car. Once the bumper has been taken away, you will only need to access the front fog lamp block and replace the fog lamp bulb on your BMW X6 in the same technique as mentioned earlier.
How to change the rear fog light bulb on your BMW X6?
Finally, if you desire to change the rear fog bulb of your car the technique is much easier, here are the different steps to stick to to allow you to replace this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your BMW X6.
- After locating the rear fog light bulb on your car, remove the burnt-out bulb
- Put in your new rear fog light bulb into the headlamp block of your BMW X6
- Put everything back in place
Check that your fog lights are working properly again before you hit the road and you’re done.
To discover more tips on the BMW X6, take a look at the BMW X6 category.
.
