It doesn’t matter if it’s for your personal safety, for roadworthiness evaluation or for your wallet, being sure your headlight bulbs are actually efficient is really important. The truth is, bulbs are wearing parts that will inevitably burn out with time and therefore need to be changed. You’re probably in this article because one of your headlights is burnt out and you’re wondering how to change the bulb of the fog lights on your Bmw X2, we’ve written and published this content page to help you do this procedure by yourself and not need to go to your auto mechanic. To begin with ,, we will look at chaging the front fog light bulb of your Bmw X2 and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Bmw X2?
We are gonna commence this content page with the swapping the front fog light bulb of your Bmw X2, take note that based on the year and the finish of your car it may not be the exact technique to use, that’s why we are going to give you the two most traditional ways to change the front fog light bulb of your car.
Change the front fog light bulb of your Bmw X2 without removing the bumper.
First solution, we will change the bulb without dismantling the bumper of your car. Even though this strategy is the least difficult, there is no assurance that you can perform it on your vehicle. The truth is, depending on the options and the year, on some models there will not be enough room for you to change the bulb using this method. Here are the two different ways to change the front fog lamp bulb of your Bmw X2:
- By passing under the bumper of your Bmw X2: First technique, you will position yourself under your vehicle, don’t be reluctant to raise it with a jack if you don’t have enough room under the bumper. Once under the vehicle, all you have to do is to remove the clips of the plastic shoe that covers your engine motor and that rests on your bumper, you will have access to the fog light block of your Bmw X2 and you will not have any more (if you have enough space) remove the plastic cover, disconnect the plug, press on the metal part to take out the bulb and at last swap the front fog light bulb of your Bmw X2
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To accomplish this, lift your vehicle up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and execute the same procedure as detailed previously to change the bulb of the fog light of your Bmw X2.
How to change the front fog light bulb of your Bmw X2 by removing the bumper?
We will at this point check out the circumstance where you are obliged by lack of room on your car model to remove the bumper of your Bmw X2 to be able to gain access to the front fog light bulb of your car. To do so, you will initially have to remove the front bumper of your Bmw X2, do not think twice to browse our complete guide to know the exact operation, know to summarize, that you will need torx wrench, and that you will have to remove screws under your cover, in your wheel arches and under your vehicle. Once the bumper has been removed, you will only need to access the front fog lamp block and change the fog lamp bulb on your Bmw X2 in the same manner as mentioned previously.
How to change the rear fog light bulb on your Bmw X2?
Finally, if you desire to change the rear fog bulb of your car the technique is much simpler, here are the different steps to stick to to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Bmw X2.
- After finding the rear fog light bulb on your car, remove the burnt-out bulb
- Insert your new rear fog light bulb into the headlamp block of your Bmw X2
- Put everything back again
Examine that your fog lights are working properly again before you hit the road and you’re done.
If you need more guides on the Bmw X2, go to our Bmw X2 category.
.
