It doesn’t matter if it’s for your own security, for roadworthiness assessment or for your budget, ensuring that your headlight bulbs are always operational is necessary. The truth is, bulbs are wearing parts that will inevitably burn out as time passes and as a consequence need to be replaced. You’re almost certainly in this article because one of your headlights is burnt out and you’re wondering how to change the bulb of the fog lights on your BMW X1, we’ve written this article content to help you do this process by yourself and not need to go to your auto mechanic. To begin with ,, we will look at chaging the front fog light bulb of your BMW X1 and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my BMW X1?
We are going to commence this article content with the swapping the front fog light bulb of your BMW X1, take note that depending on the year and the finish of your car it may not be the exact technique to use, that’s why we are going to give you the two most traditional solutions to replace the front fog light bulb of your vehicle.
Change the front fog light bulb of your BMW X1 without removing the bumper.
First option, we will change the bulb without taking out the bumper of your car. Even though this solution is the least complicated, there is no assurance that you can carry it out on your vehicle. The truth is, based on the options and the year, on some models there will not be enough space for you to change the bulb in this manner. Here are the two different ways to change the front fog lamp bulb of your BMW X1:
- By going under the bumper of your BMW X1: First technique, you will position yourself under your vehicle, don’t be reluctant to lift it with a jack if you don’t have enough space under the bumper. Once under the vehicle, all you have to do is to remove the clips of the plastic shoe that protects your engine motor and that rests on your bumper, you will have access to the fog light block of your BMW X1 and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and finally change the front fog light bulb of your BMW X1
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To achieve this, lift your vehicle up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and conduct the same process as described above to change the bulb of the fog light of your BMW X1.
How to change the front fog light bulb of your BMW X1 by removing the bumper?
We will at this point take a look at the case where you are obliged by lack of space on your car model to remove the bumper of your BMW X1 to be able to access the front fog light bulb of your car. To achieve this, you will first have to remove the front bumper of your BMW X1, do not hesitate to consult our complete instruction to find out the exact procedure, know to summarize, that you will need torx wrench, and that you will have to remove screws under your bonnet, in your wheel arches and under your vehicle. Once the bumper has been taken off, you will only need to access the front fog lamp block and replace the fog lamp bulb on your BMW X1 in the same procedure as stated above.
How to change the rear fog light bulb on your BMW X1?
At last, if you want to change the rear fog bulb of your car the technique is much easier, here are the different steps to follow to allow you to replace this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your BMW X1.
- After discovering the rear fog light bulb on your car, remove the burnt-out bulb
- Place your new rear fog light bulb into the headlamp block of your BMW X1
- Put everything back in place
Check that your fog lights are working properly again before you hit the road and you’re done.
To get more tips on the BMW X1, take a look at the BMW X1 category.
.
