Whether it’s for your own security, for roadworthiness tests or for your wallet, being certain your headlight bulbs are actually functioning is extremely important. In reality, bulbs are wearing auto parts that will unavoidably burn out with time and consequently need to be changed. You’re almost certainly on this website because one of your headlights is burnt out and you’re concerned about how to change the bulb of the fog lights on your Audi A6, we’ve posted this content page to help you do this process without help and not need to go to your auto mechanic. To start with ,, we will look at chaging the front fog light bulb of your Audi A6 and secondly, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Audi A6?
We are going to begin this content page with the swapping the front fog light bulb of your Audi A6, bear in mind that determined by the year and the finish of your car it may not be the same technique to utilise, that’s why we are going to give you the two most common ways to change the front fog light bulb of your vehicle.
Change the front fog light bulb of your Audi A6 without removing the bumper.
First technique, we will change the bulb without taking out the bumper of your car. Even though this method is the easiest, there is no guarantee that you can perform it on your car. In reality, based on the options and the year, on some models there will not be enough room for you to change the bulb in this manner. Here are the two different techniques to change the front fog lamp bulb of your Audi A6:
- By going under the bumper of your Audi A6: First approach, you will position yourself under your car, don’t hesitate to lift it with a jack if you don’t have enough room under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that covers your engine motor and that rests on your bumper, you will have access to the fog light block of your Audi A6 and you will not have any more (if you have enough space) remove the plastic cover, disconnect the plug, press on the metal part to take out the bulb and finally swap the front fog light bulb of your Audi A6
- By removing the wheel arch: Second alternative, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To do this, lift your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and carry out the same process as mentioned above to change the bulb of the fog light of your Audi A6.
How to change the front fog light bulb of your Audi A6 by removing the bumper?
We will now check out the circumstance where you are obliged by lack of room on your car model to remove the bumper of your Audi A6 to be able to access the front fog light bulb of your car. To achieve this, you will initially have to remove the front bumper of your Audi A6, do not hesitate to read our complete instruction to find out the exact operation, know to summarize, that you will need torx wrench, and that you will have to remove screws under your cover, in your wheel arches and under your car. Once the bumper has been removed, you will only need to access the front fog lamp block and replace the fog lamp bulb on your Audi A6 in the same technique as mentioned above.
How to change the rear fog light bulb on your Audi A6?
At last, if you wish to change the rear fog bulb of your car the technique is much simpler, here are the different steps to follow to allow you to replace this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Audi A6.
- After locating the rear fog light bulb on your car, remove the burnt-out bulb
- Place your new rear fog light bulb into the headlamp block of your Audi A6
- Put everything back again
Verify that your fog lights are working correctly again before you hit the road and you’re done.
Whenever you have any additional questions about the Audi A6, do not hesitate to consult our Audi A6 category.
.
