Regardless whether it’s for your own security, for roadworthiness tests or for your wallet, being sure your headlight bulbs are actually functional is necessary. The reality is, bulbs are wearing parts that will unavoidably burn out as time passes and therefore need to be changed. You’re likely in this article because one of your headlights is burnt out and you’re wondering how to change the bulb of the fog lights on your Audi A3, we’ve created this content page to help you do this process without help and not need to go to your auto mechanic. Firstly, we will look at chaging the front fog light bulb of your Audi A3 and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Audi A3?
We are gonna begin this content page with the swapping the front fog light bulb of your Audi A3, be aware that determined by the year and the finish of your car it may not be the exact method to use, that’s why we are going to give you the two most classical ways to replace the front fog light bulb of your car.
Change the front fog light bulb of your Audi A3 without removing the bumper.
First method, we will swap the bulb without taking out the bumper of your car. Although this approach is the least complicated, there is no assurance that you can carry it out on your vehicle. The reality is, depending on the options and the year, on some models there will not be enough space for you to change the bulb in this way. Here are the two different methods to change the front fog lamp bulb of your Audi A3:
- By going under the bumper of your Audi A3: First approach, you will position yourself under your vehicle, don’t hesitate to raise it with a jack if you don’t have enough space under the bumper. Once under the vehicle, all you have to do is to remove the clips of the plastic shoe that protects your engine and that rests on your bumper, you will have access to the fog light block of your Audi A3 and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and finally swap the front fog light bulb of your Audi A3
- By removing the wheel arch: Second solution, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To make this happen, jack your vehicle up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and perform the same process as detailed earlier to change the bulb of the fog light of your Audi A3.
How to change the front fog light bulb of your Audi A3 by removing the bumper?
We will now check out the case where you are obliged by lack of space on your car model to remove the bumper of your Audi A3 in order to gain access to the front fog light bulb of your car. To achieve this, you will first of all have to remove the front bumper of your Audi A3, do not think twice to consult our complete guide to find out the exact operation, know to summarize, that you will need torx wrench, and that you will have to remove screws under your bonnet, in your wheel arches and under your vehicle. Once the bumper has been taken off, you will only need to access the front fog lamp block and change the fog lamp bulb on your Audi A3 in the same procedure as mentioned earlier.
How to change the rear fog light bulb on your Audi A3?
To finish, if you wish to change the rear fog bulb of your car the method is much easier, here are the different steps to follow to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Audi A3.
- After locating the rear fog light bulb on your car, remove the burnt-out bulb
- Place your new rear fog light bulb into the headlamp block of your Audi A3
- Put everything back again
Verify that your fog lights are working correctly again before you hit the road and you’re done.
If you have any further questions about the Audi A3, do not hesitate to consult our Audi A3 category.
.
