Whether it’s for your personal security, for roadworthiness assessment or for your budget, ensuring your headlight bulbs are constantly functioning is extremely important. In reality, bulbs are wearing parts that will unavoidably burn out after a while and as a result need to be changed. You’re almost certainly on this page because one of your headlights is burnt out and you’re concerned about how to change the bulb of the fog lights on your Acura TL, we’ve written and published this content to help you do this procedure without help and not need to go to your mechanic. First of all, we will look at chaging the front fog light bulb of your Acura TL and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Acura TL?
We are gonna begin this content with the changing the front fog light bulb of your Acura TL, you should know that based on the year and the finish of your car it may not be the same process to utilise, that’s why we are going to give you the two most classical strategies to replace the front fog light bulb of your car.
Change the front fog light bulb of your Acura TL without removing the bumper.
First option, we will replace the bulb without removing the bumper of your car. Even though this approach is the easiest, there is no assurance that you can carry it out on your car. In reality, depending on the options and the year, on some models there will not be enough space for you to change the bulb in this manner. Here are the two different methods to change the front fog lamp bulb of your Acura TL:
- By going under the bumper of your Acura TL: First technique, you will position yourself under your car, don’t be reluctant to raise it with a jack if you don’t have enough space under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that protects your engine motor and that rests on your bumper, you will have access to the fog light block of your Acura TL and you will not have any more (if you have enough space) remove the plastic cover, disconnect the plug, press on the metal part to take out the bulb and finally change the front fog light bulb of your Acura TL
- By removing the wheel arch: Second solution, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To get this done, lift your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and carry out the same procedure as mentioned above to change the bulb of the fog light of your Acura TL.
How to change the front fog light bulb of your Acura TL by removing the bumper?
We will now check out the circumstance where you are obliged by lack of space on your car model to remove the bumper of your Acura TL in order to gain access to the front fog light bulb of your car. To do this, you will initially have to remove the front bumper of your Acura TL, do not hesitate to have a look to our complete guide to know the exact technique, know to summarize, that you will need torx wrench, and that you will have to remove screws under your bonnet, in your wheel arches and under your car. Once the bumper has been taken off, you will only need to access the front fog lamp block and change the fog lamp bulb on your Acura TL in the same manner as described above.
How to change the rear fog light bulb on your Acura TL?
Finally, if you want to change the rear fog bulb of your car the process is much simpler, here are the different steps to follow to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Acura TL.
- After finding the rear fog light bulb on your car, remove the burnt-out bulb
- Place your new rear fog light bulb into the headlamp block of your Acura TL
- Put everything back again
Verify that your fog lights are working properly again before you hit the road and you’re done.
Whenever you have any further questions about the Acura TL, do not hesitate to consult our Acura TL category.
.
