Kepping is car in good conditions is one of the most important responsibilities you need to do if you want to keep your car in good condition and avoid unforeseen equipment failures that would require you to spend a lot of cash. Some maintenance tasks seem obvious to almost all people, just like oil and filter replacing, but for others you may not always be aware of them. Today we’re going to focus on a less known but equally significant maintenance task, how to change the cabin filter on my Peugeot e-2008? To do this, first we’ll see where the cabin filter on your Peugeot e-2008 is, and secondly how to change this popular filter, as well called pollen filter.

change-cabine-filter-peugeot-e-2008

Where is the cabin filter on my Peugeot e-2008?

So let’s start our article with location of the cabin filter on your Peugeot e-2008. According to the year of your motor vehicle and the series, the filter can be placed in three different places, we will now detail these locations.

Passenger compartment filter situated in the engine compartment

To find the cabin filter of your Peugeot e-2008?, we advise you to take a look at the side of the engine compartment, in truth, it is one of the most chosen places for car producers. This is only mainly because this is where the Peugeot e-2008’s external air intake is situated. This is where your car will supply air to your passenger compartment. It is most of the time located just beneath the windscreen, at the level of the air vents, you can access it through the bonnet of your motor vehicle, it will be in a plastic box.

Cabin filter which is beneath the glove box of an Peugeot e-2008

The second possible location for the cabin filter on your Peugeot e-2008 is under the glove compartment of your motor vehicle. This is the least difficult place to access, you will just have to lie down and look under your glove box and you should recognize a black box including the pollen filter, just unclip it to access your filter.

Cabin filter which is under the dashboard of your Peugeot e-2008

Finally, last spot where the cabin filter on your Peugeot e-2008 can be placed is beneath your dashboard, to access it you will have to take off your glove box which is generally held by clips or a screw. Once this is done, you should see the black box it is in.

How to change the cabin filter of my Peugeot e-2008?

Finally, we will now show you how to change the cabin filter of your Peugeot e-2008? Although this is a rather common step, it must be done at the right time to avoid concerns on your automobile.

When to change the cabin filter on Peugeot e-2008?

The big question for a large number of Peugeot e-2008 owners is when to change this filter, because we know that you have to change it every 20,000 kilometres; don’t be reluctant to read our article on the removal of the service indicator light; however, for the cabin filter, it’s a complete other question. It should be replaced every year if you use your automobile regularly or every two years if you drive in the country side and only make short trips. The purpose of this filter is to filter out air pollutants, allergens and exhaust fumes. Do not hesitate to change it more regularly if you drive in city.

How to take off the cabin filter on my Peugeot e-2008?

Last but not least, the last step that definitely draws you to this tips guide, how to take off the cabin filter from your Peugeot e-2008? This step is actually very simple. Once you’ve found the location of the filter, all you have to do is to unclip the box in which it is located and softly pull it out. Be careful when taking it out to look carefully in which direction it is positioned (you will often find an arrow that gives the direction of the air), so remember to position your new filter in the same direction. You just have to close and re-clip the box and you’re done changing the cabin filter of your Peugeot e-2008.

To discover more tips on the Peugeot e-2008, take a look at the Peugeot e-2008 category.