Whether for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functioning is necessary. In reality, bulbs are wearing parts that will obviously burn out in the long run and as a result need to be replaced. You’re probably on this page because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Volvo XC60, we’ve put into writing this article to teach you do it all on your own without having to go to your mechanic. To begin , we will check out the checking a burnt-out rear turn signal bulb on your Volvo XC60 and in a second part, how to replace the rear turn signal bulb on your Volvo XC60.
How do you know if the rear turn signal bulb on your Volvo XC60 is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the occasion to verify all the security features of your Volvo XC60. In reality, you are more often than not in a hurry and tend to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore important to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Volvo XC60, but you didn’t perceive it. Here are the two simple methods to verify if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Volvo XC60, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Volvo XC60, you will realize that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Volvo XC60 or your position lights on Volvo XC60, don’t hesitate to browse our web content to help you to complete this substitution.
Changing the rear turn signal bulb on my Volvo XC60
Now let’s go to the most important part of this guideline, how to replace the rear turn signal bulb on Volvo XC60? You should be aware that this method is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Volvo XC60, see our dedicated article. Nevertheless, here are the detailed steps to carry out to be able to perform this act properly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Volvo XC60. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating in the right way
.
To get more tips on the Volvo XC60, take a look at the Volvo XC60 category.
