No matter if it’s for your own safety, for roadworthiness evaluation or to prevent a fine, being sure your turn signal bulbs are always functional is imperative. In truth, bulbs are wearing parts that will surely burn out over time and therefore need to be replaced. You’re probably in this article because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Volkswagen Transporter 4, we’ve put into writing this post to teach you do it all on your own without having to go to your repair shop. To begin , we will examine the checking a burnt-out rear turn signal bulb on your Volkswagen Transporter 4 and in a second step, how to replace the rear turn signal bulb on your Volkswagen Transporter 4.
How to be sure if the rear turn signal bulb on your Volkswagen Transporter 4 is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the occasion to verify all the safety features of your Volkswagen Transporter 4. In truth, you are more often than not on the go and are likely to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a result necessary to spend some time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Volkswagen Transporter 4, but you didn’t identify it. Here are the two basic techniques to verify if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Volkswagen Transporter 4, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Volkswagen Transporter 4, you will realize that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Volkswagen Transporter 4 or your position lights on Volkswagen Transporter 4, don’t be reluctant to consult our web content to help you to do this replacing.
Changing the rear turn signal bulb on my Volkswagen Transporter 4
Now let’s go to the most instersting step of this article content, how to replace the rear turn signal bulb on Volkswagen Transporter 4? Take note that this operation is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Volkswagen Transporter 4, see our dedicated guideline. On the other hand, here are the detailed steps to adhere to to be able to complete this act correctly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Volkswagen Transporter 4. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
To discover more tips on the Volkswagen Transporter 4, take a look at the Volkswagen Transporter 4 category.
