No matter if it’s for your personal safety, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are constantly functional is extremely important. In actual fact, bulbs are wearing parts that will surely burn out over time and therefore need to be swapped out. You’re likely here because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Volkswagen Rabbit, we’ve created this post to enable you do it by yourself without having to go to your technician. In a first step, we will have a look at inspecting a burnt-out rear turn signal bulb on your Volkswagen Rabbit and in a second part, how to change the rear turn signal bulb on your Volkswagen Rabbit.
How to be sure if the rear turn signal bulb on your Volkswagen Rabbit is burnt-out or needs to be changed?
When you drive your vehicle you don’t constantly have the possibility to verify all the safety features of your Volkswagen Rabbit. In actual fact, you are often times in a rush and tend to get into your vehicle, make your trip and put it down straight away without taking the time to do an occasional check-up. It is due to this fact necessary to take the time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Volkswagen Rabbit, but you didn’t notice it. Here are the two ordinary ways to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Volkswagen Rabbit, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Volkswagen Rabbit, you will recognise that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Volkswagen Rabbit or your position lights on Volkswagen Rabbit, don’t be reluctant to consult our web content to help you to achieve this replacement.
Changing the rear turn signal bulb on my Volkswagen Rabbit
Now let’s go to the most instersting part of this article, how to change the rear turn signal bulb on Volkswagen Rabbit? Please be aware that this operation is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Volkswagen Rabbit, see our specific content page. Nevertheless, here are the detailed description to follow to be able to carry out this act correctly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Volkswagen Rabbit. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
To discover more tips on the Volkswagen Rabbit, take a look at the Volkswagen Rabbit category.
