No matter if it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always working is very important. In reality, bulbs are wearing auto parts that will inevitably burn out as time passes and therefore need to be replaced. You’re probably here because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Toyota Sequoia, we’ve posted this article to enable you do it without any help without having to go to your repair shop. In a first step, we will examine the checking a burnt-out rear turn signal bulb on your Toyota Sequoia and in a second part, how to replace the rear turn signal bulb on your Toyota Sequoia.
How to find out if the rear turn signal bulb on your Toyota Sequoia is burnt-out or needs to be replaced?
When you drive your car you don’t always have the occasion to check all the security features of your Toyota Sequoia. In reality, you are often in a hurry and are likely to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore fundamental to spend some time to in some instances check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Toyota Sequoia, but you didn’t identify it. Here are the two ordinary methods to check if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Toyota Sequoia, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By paying attention to the sound of your turn signals. In actual fact, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Toyota Sequoia, you will recognise that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Toyota Sequoia or your position lights on Toyota Sequoia, don’t be reluctant to browse our publications to help you to achieve this replacing.
Changing the rear turn signal bulb on my Toyota Sequoia
Now let’s go to the most important part of this guideline, how to replace the rear turn signal bulb on Toyota Sequoia? Please note that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Toyota Sequoia, see our specific content page. Nevertheless, here are the detailed steps to follow to be able to execute this process accurately:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Toyota Sequoia. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating in the right way
.
If you need more guides on the Toyota Sequoia, go to our Toyota Sequoia category.
