Whether for your personal security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are all the time functioning is very important. In reality, bulbs are wearing auto parts that will surely burn out after a while and consequently need to be swapped out. You’re almost certainly in this article because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Toyota C-hr, we’ve made this content to help you do it by yourself without having to go to your repair shop. To begin , we will check out examining a burnt-out rear turn signal bulb on your Toyota C-hr and in a second step, how to change the rear turn signal bulb on your Toyota C-hr.
How to be sure if the rear turn signal bulb on your Toyota C-hr is burnt-out or needs to be replaced?
When you drive your vehicle you don’t all the time have the occasion to check all the security features of your Toyota C-hr. In reality, you are quite often in a rush and are likely to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result fundamental to take a little time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Toyota C-hr, but you didn’t notice it. Here are the two ordinary ways to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Toyota C-hr, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Toyota C-hr, you will detect that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Toyota C-hr or your position lights on Toyota C-hr, don’t be reluctant to consult our content articles to help you to realize this replacement.
Changing the rear turn signal bulb on my Toyota C-hr
Now let’s go to the most important step of this content, how to change the rear turn signal bulb on Toyota C-hr? Please note that this operation is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Toyota C-hr, see our dedicated article content. However, here are the full description to follow to be able to conduct this process accurately:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Toyota C-hr. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning effectively
.
If you have any additional questions about the Toyota C-hr, do not hesitate to consult our Toyota C-hr category.
