Whether for your own security, for roadworthiness testing or to prevent a fine, being sure your turn signal bulbs are all the time working is fundamental. In reality, bulbs are wearing parts that will inevitably burn out after a while and therefore need to be replaced. You’re certainly on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Toyota Avalon, we’ve made this article to enable you do it without any help without having to go to your auto mechanic. In a first step, we will check out inspecting a burnt-out rear turn signal bulb on your Toyota Avalon and in a second step, how to change the rear turn signal bulb on your Toyota Avalon.
How do you know if the rear turn signal bulb on your Toyota Avalon is burnt-out or needs to be changed?
When you drive your vehicle you don’t all the time have the opportunity to examine all the security features of your Toyota Avalon. In reality, you are quite often on the go and are likely to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is therefore fundamental to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Toyota Avalon, but you didn’t identify it. Here are the two basic techniques to examine if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Toyota Avalon, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are working.
- By listening to the sound of your turn signals. In truth, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Toyota Avalon, you will notice that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Toyota Avalon or your position lights on Toyota Avalon, don’t hesitate to read our content articles to help you to achieve this replacement.
Replacing the rear turn signal bulb on my Toyota Avalon
Now let’s go to the most important step of this article, how to change the rear turn signal bulb on Toyota Avalon? Take note that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Toyota Avalon, see our dedicated guideline. However, here are the detailed description to stick to in order to do this process correctly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Toyota Avalon. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning in the right way
.
In the event that you have any additional questions about the Toyota Avalon, do not hesitate to consult our Toyota Avalon category.
