No matter if it’s for your own security, for roadworthiness evaluation or to prevent a fine, ensuring your turn signal bulbs are constantly working is extremely important. In actual fact, bulbs are wearing devices that will predictably burn out in the long run and as a result need to be swapped out. You’re certainly on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Toyota Auris 2, we’ve written this content to help you do it on your own without having to go to your mechanic. In a first step, we will examine examining a burnt-out rear turn signal bulb on your Toyota Auris 2 and in a second step, how to replace the rear turn signal bulb on your Toyota Auris 2.

change-rear-turn-bulb-toyota-auris-2

How do you know if the rear turn signal bulb on your Toyota Auris 2 is burnt-out or needs to be replaced?

When you drive your car you don’t constantly have the occasion to verify all the security features of your Toyota Auris 2. In actual fact, you are more often than not in a hurry and are likely to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is therefore fundamental to make the effort to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Toyota Auris 2, but you didn’t perceive it. Here are the two basic ways to verify if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:

  • When you stop, turn on the ignition on your Toyota Auris 2, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
  • By listening to the sound of your turn signals. In fact, there is an audible warning on each car that alerts you of a rear turn signal bulb burnt out on your Toyota Auris 2, you will recognise that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.

You may have another bulb to replace, like the one of your low beam Toyota Auris 2 or your position lights on Toyota Auris 2, don’t hesitate to read our content articles to help you to achieve this replacing.

Replacing the rear turn signal bulb on my Toyota Auris 2

Now let’s go to the most important step of this article, how to replace the rear turn signal bulb on Toyota Auris 2? Take note that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Toyota Auris 2, see our dedicated article content. On the other hand, here are the detailed steps to follow in order to conduct this act properly:

  • To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Change the rear turn signal bulb on your Toyota Auris 2. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating properly

To get more tips on the Toyota Auris 2, take a look at the Toyota Auris 2 category.